Categories
BLOG

vision spinner 2 weed vs e liquid

Vision spinner 2 weed vs e liquid

Note: The following information has been provided for educational purposes only. Please consult your local laws before attempting any of the projects described below.

Some of the most frequently asked questions we hear are:

  • Can you put marijuana in an electronic cigarette (e-cig)?
  • Can an electronic cigarette vaporize marijuana?
  • Can I use my electronic cigarette with concentrates, waxes, and oils?

The answer is yes, yes, and yes. This guide will explain how you can use electronic cigarette components with dry herbs, concentrates, and THC e-liquids to create a personal vaporizer that will allow you to medicate on the go without breaking the bank.

Option 1: Using Marijuana in an Electronic Cigarette

What You’ll Need:

  • An electronic cigarette battery with eGo threading (such as the eGo-Twist or Vision Spinner)
  • A dry herb cartridge

If you’d like to smoke dry herbs, then all you need is an eGo-compatible e-cigarette battery and a dry herb cartridge. For best results, we recommend using a variable voltage battery so that you can fine-tune the temperature to your liking. Please note that all vape pen herb cartridges will combust your herb, not vaporize it. A dry herb cartridge attachment will allow you to turn your e-cigarette into an electric pipe (or e-blunt) with ease.

Pros:

  • Work with dry herbs
  • Easiest “smoke on the go” solution

Cons:

  • Since it combusts the herb, it will not be as discreet or stealthy as a vaporizer

Option 2: Using Oils, Waxes, and Other THC Concentrates in an Electronic Cigarette

What You’ll Need:

  • An electronic cigarette battery with eGo threading (such as the eGo-Twist or Vision Spinner) or 510 threading
  • An eGo oil cartridge, 510 oil cartridge, or glass globe attachment

If you prefer to vape hash oil, wax, budder, shatter, BHO, full-melts, or any other form of THC concentrate, then you’ll need to complement your e-cigarette battery with a concentrate cartridge or glass globe attachment. Depending on your preferences, there are a few different ways to build an e-cigarette setup that will allow you to vape concentrates:

  • I want something stealthy: Buy a 510 thread e-cigarette battery and a V2 oil cartridge, or buy our Micro Vape Kit which includes both. This setup is the most discreet way to enjoy concentrates on the go.
  • I want maximum capacity: Buy a variable voltage eGo e-cigarette battery and a Mega V2 oil cartridge. The Mega V2 holds over 1 gram of concentrates, making this one of the heaviest hitting concentrate pen setups on the market today.
  • I want to see my clouds: Buy a variable voltage eGo e-cigarette battery and a Glass Globe. This is a great choice for people who are used to dabbing using an oil rig and would like to see the clouds they’re creating.

Pros:

  • Best combination of power and portability — big hits in a small package
  • Vaping concentrates produces less smell than burning herbs, so it’s more discreet

Cons:

  • Requires access to THC concentrates

Option 3: Using THC E-Liquids and Cannabis Tinctures in an Electronic Cigarette

What You’ll Need:

  • An electronic cigarette battery with eGo threading (such as the eGo-Twist or Vision Spinner)
  • A dual coil tincture tank
  • Tincture liquid blend (if you’re making it yourself)

THC E-Liquids (also known as tinctures) combine the flavor and convenience of e-liquids with the potency and portability of concentrates. If you’re a medical marijuana patient in California, you can buy pre-filled tincture cartridges from our partners, or you can make your own tinctures using the instructions here (disclaimer: we have not independently verified the instructions here; follow at your own risk).

Pros:

  • Because vaping tinctures does not produce much smell, this method provides for maximum stealth and discretion
  • You can create your own custom flavor blends

Cons:

  • Less potent than pure concentrate cartridges
  • May require some DIY effort

Option 4: Using Pre-Filled Medicated Cartridges in an Electronic Cigarette

What You’ll Need:

  • A medical marijuana prescription in the state of California
  • An electronic cigarette battery with eGo threading (such as the eGo-Twist or Vision Spinner)
  • A pre-filled medicated cartridge

If you’re a medical marijuana patient in California and you’re not interested in going the do-it-yourself route, you can purchase pre-filled medicated cartridges from one of our partners. This is the easiest way to vaporize concentrates and tinctures using your existing e-cigarette setup.

Pros:

  • Easiest way to vape concentrates and tinctures
  • Pre-filled cartridges are available in a variety of strains and flavors

Cons:

  • Only available to medical marijuana patients

Got a question about any of the options listed above? Email us and we’d be happy to help you build a setup that works for you.

A complete how-to guide for building your own vape pen and smoking/vaporizing marijuana using an electronic cigarette. Use your e-cigarette with concentrates.

Vision Spinner 2 User Manual – Detailed How-To Instructions

Vision Spinner 2 User Manual – Detailed How-To Instructions

The Vision Spinner 2 is the follow-up to Vprocity’s original Vision Spinner battery. Featuring upgraded PCB circuitry, a 1650mah, and adjustable voltage dial the Vision Spinner 2 is a considerable upgrade to the original. We’ve put together the most comprehensive user manual/how-to-guide for the Vision Spinner 2 on the internet. Before we begin, first we will go over the main buttons used to operate this sleek new pen style battery.

Vision Spinner 2 Parts

There are three main parts that you will use while operating the Vision Spinner 2.

  • The threading connection – This is the part that is found at the top of the battery. All Vision, Spinner series batteries, are 510-eGo threaded and can connect to almost any Atomizer on the market. The 510-eGo connection is not only used for atomizers; it is used fo Charge the device.
  • Power button – The power button is used to turn the Vision Spinner 2 on and off, as well as send electricity to the Atomizer.
  • Variable Voltage Dial – The variable voltage dial is located on the bottom of the device. Turning it clockwise will increase the voltage. While turning it, counterclockwise will decrease the voltage. The voltage settings are written on the bottom of the battery, and each voltage setting can be lined up with the red line on the dial.

How Do You Turn The Vision Spinner 2 On?

To Turn the Vision Spinner two on rapidly, press the LED button five times. When the battery is successfully turned on, the LED fire button will flash three times, displaying a mixture of all three battery light indicator colors.

How Do You Turn The Vision Spinner 2 Off?

To Turn the Vision Spinner two off rapidly, press the LED button five times. When the battery is successfully turned off, the LED fire button will flash three times, displaying a mixture of all three battery light indicator colors.

How Do You Change The Vision Spinner 2 Voltage?

The Vision Spinner 2 is capable of producing output voltages ranging from 3.3V-4.8V. The operating voltage can be adjusted by rotating the dial located bottom of the battery. If you take a look at the dial, you’ll notice a red line. The red line indicates the current-voltage and the voltage indicator that it is line up with is the current-voltage that you are using to vape. Although there are four primary markings, the voltage can be adjusted to any setting between 3.3V to 4.8V.

When adjusting the Vision Spinner 2 voltage, please remember that the voltage can only be adjusted between 3.3V and 4.8V on the scale. If you forcefully spin the dial past these voltage ranges, the Vision Spinner 2 battery may become damaged.

How-to Attach A Clearomizer to the Vision Spinner 2

To attach the clearomizer to the Vision Spinner 2 battery, grasp your clearomizer and screw it clockwise until it fits snugly on the battery. Please make sure not to over-tighten or cross-thread the batter as this may damage the 510 connection.

How-to Detach A Clearomizer from The Vision Spinner 2

To detach a clearomizer from your Vision Spinner 2, grab the clearomizer with one hand and hold your battery in the other. Turn the Clearomizer counterclockwise until the clearomizer is removed from the battery.

Where To Buy a Vision Spinner 2 Cartridges

The Vision Spinner 2 is compatible with 510-Ego threaded cartridges. Follow the link to purchase cartridges compatible with the Vision Spinner 2.

How-To use the Vision Spinner 2

To use the Vision Spinner 2 follow the step below

  1. Attach the Atomizer to the 510-eGo threading – Line up the thread on your Atomizer to the Spinner 2 and then turn it until it’s tightly secured. Make sure not to over-tighten or cross-thread as this may damage the battery.
  2. Turn On The Vision Spinner 2 Battery – turn on the Spinner 2 by following the steps mentioned in the section above
  3. Start Vaping Insert the mouthpiece and press the button on the Vision Spinner 2. Take slow inhales to properly break in your coil and avoid burnt hits.

How Do I Know the Charge Level Of My Vision Spinner 2 Vape Battery?

The Vision Spinner 2 displays its battery level using 3 different colored LED lights on the fire button; the three colors that the LED can show are white, blue, and orange.

  • White Led – 60%-100% power
  • Blue Led – 30%-60% power
  • Orange – 0%-30% power

When the battery reaches 0% charge, the LED indicator light will flash fifteen times, displaying a mix of all three colors. When this happens, the battery can no longer function without being fully charged.

How-To Properly Charge the Vision Spinner 2

The Vision Spinner 2 features upgraded circuitry and a massive 1650mAh battery. To properly charge the Vision Spinner 2, remember to charge the device when it is only entirely out of power.

To Charge your battery removes the clearomizer and wipe the battery contacts down until they are completely dry. Grab the ego charger and screw the Vision Spinner 2 in clockwise, being careful not to over-tighten. You can plug the Ego Charger in via a USB outlet in your Pc or using a compatible eGo main wall charger.

Once the Ego charger is plugged into an appropriate outlet and is charging, the battery will flash, orange, blue, and then white. The LED light on the eGo battery will turn off once the battery is fully charged. The eGo charger also has an LED light on it. While charging, the eGo charger light will be red, and eventually, turn green once fully charged.

How Long Does it take to Charge The Vision Spinner 2

The Vision Spinner 2 takes five to six hours to become fully charged.

How Many Charges Will the Vision Spinner 2 Last?

The Vision spinner 2 is a consumable battery that can last up to 300 charges.

Vision Spinner 2 Protections

Vision Spinner 2 battery has the following built-in to the device:

  • Atomizer Protection – a warning presented when an inappropriate atomizer is used
  • Working Time Protection – using the wrong USB charger for the battery or any other issues.
  • Short Circuit Protection – the Vision Spinner 2 LED will flash three times and temporarily stops working until the short circuit is fixed. Short Circuits are caused by using compatible atomizers and voltage settings
  • 8s Cut-Off Protection – If the fire button is pressed for more than 8 seconds, the battery will flash five times and immediately stop any electrical output
  • Low Voltage Protection – When the battery drops below 3.3 volts, the battery will shut down to protect your device.
  • Over-discharge Protection – The Spinner will automatically shut off while discharging to prevent the power from becoming completely depleted. The LED light will flash five times as a reminder to charge your battery.

Other Things To Be Aware of While Using the Vision Spinner 2

  • Do not let the battery charge while unattended.
  • Do not charge the battery overnight.
  • Batteries contain electronic circuits, and like any electronic device, they can be damaged if dropped, mistreated, or immersed in water or any other liquids.
  • Only charge the battery using your computer. Not all USB ports are the same. Only use USB ports that are directly connected to your computer and not extension USB ports.
  • The voltage output of your computer or wall adapter may potentially not be enough to properly charge the battery.
  • The Vision Spinner 2 Battery requires a standard USB charger of 420mA output and a wall adapter of 500mA output. Any use of non-standard chargers, especially with higher output such as cell phone chargers, will damage the battery.
  • The use of non-standard chargers on Spinner 2 is hazardous, and any use of such chargers immediately invalidates the warranty.

Well, that’s everything! “Breathe Easy” Om Fam!

The most comprehensive Vision Spinner 2 user manual/how-to guide on the internet. Everything you need to know, all in one place.