Categories
BLOG

how to cure weed with fruit

How to rehydrate weed

Copy article link to clipboard.

Link copied to clipboard.

Contents

  1. How to store weed
  2. Why would you want to rehydrate weed?
  3. How to rehydrate weed
  4. Bottom line

Any cannabis flower you consume should have a certain level of moisture for an optimal experience. Moisture affects potency, flavor, aroma, and the health of a bud. If cannabis is too moist, it may develop mold and harm your smoke. If cannabis is too dry, it will burn up and possibly degrade too quickly. The ideal moisture content will prevent these potential problems and help give your cannabis the flavor, feel, and effects that you want. If you end up with some dry weed on your hands, there are a variety of tried-and-true methods you can use to rehydrate.

How to store weed

When it comes to keeping flower properly hydrated, the optimal method is always prevention. Proper storage that keeps flower fresh is the best way to ensure you’re getting the most out of your weed. Never store your bud out in the open or on a tray. Improper storage will expose your weed to an excess of oxygen and light, the two most immediate culprits of cannabis degradation. Keeping weed fresh and potent requires a delicate balance of environmental conditions.

Though clear containers and plastic bags are common forms of packing, the best way to store weed is to keep it in an opaque, airtight container in a cool, dry place without direct sunlight. Storing in an opaque container helps to ensure optimal moisture content because it keeps light out.

Storing in an opaque container helps to ensure optimal moisture content because it keeps light out. Photo by: Gina Coleman/Weedmaps

Image lightbox

Ideally, you should store your weed just below room temperature. Some light and air will inevitably get into your weed containers when they are opened, so be sure to keep them closed when not in use. Properly storing your weed ahead of time is the best way to prevent dehydration and extend shelf life.

Why would you want to rehydrate weed?

Even those with limited cannabis experience have likely smoked some dry weed before. Depending on the severity of the dry bud you smoked, you may not have ever considered rehydrating it, or known it was an option. Weed will inevitably degrade over time andmay dehydrate too quickly, leaving you with a subpar end-product.

In most legal markets, weed isn’t cheap. No one wants to throw their money away, especially if they’ve invested it in top-shelf cannabis. Fortunately, most methods of rehydrating weed aren’t labor-intensive, and many are effective.

There’s no escaping dehydration of your bud in the long run, but if the weed comes to you dry, or dries out before you have a chance to smoke it, rehydrating is well worth your time.

How to rehydrate weed

Weed’s relationship with moisture is complicated. All cultivators dry and cure their cannabis. The goal of drying and curing is not to completely remove moisture from the bud, but to let it slowly dissipate without altering cannabinoid and terpene content.

The ideal moisture content for cannabis flower tends to fall between 6 and 9%. A humidity level above 65% will likely result in mold development on the bud. The drying process is intended to decrease moisture content to less than 15%, while curing takes the bud down to 9% or lower.

The process of drying, curing, and maintaining the optimal moisture of cannabis is a delicate, complicated process. If you find that the weed you’ve purchased, grown, or stored is dry and brittle, there are a variety of ways to resurrect your dry buds.

Here are some of the most common methods of rehydrating weed.

Lettuce

Lettuce comprises up to 95% water, which makes it a great candidate for rehydrating your weed. Similar to using a citrus peel, leaving a small cut of lettuce peel in a bag with your dry buds for 2-3 hours can rehydrate them without transferring any taste or smell.

Fresh weed mixed with dry weed

If you happen to have some fresh, sufficiently moist bud on hand, you can try putting it in the same jar as your dry bud. This method may not be as reliable as others, and you may want to keep your different strains separate, but it’s a quick and easy way to make all your bud fresh without having to use any extra materials.

Damp q-tip, paper towel, cotton ball, or small sponge

Another method of rehydrating without transferring scent and aroma from other plants or foods is to place a damp q-tip, cotton ball, piece of paper towel, or small sponge in a container with your dry bud. If you use a q-tip, try and place it above your nugs without touching them. The point is to absorb minimal moisture from the q-tip, towel, or sponge to get the optimal amount for your weed.

Humidity packs

If all else fails, buy disposable humidity control packs to place in your weed jars. Some control packs are specifically designed to preserve optimal humidity for cannabis.

Citrus peel

Using a citrus peel is arguably the most popular DIY method of rehydrating weed. All you have to do is cut the outer layer of an orange, lemon, or other citrus peel and place it in your nug jar, tightly sealed of course. Citrus peels are naturally moist but will likely transfer some of their flavor and aroma to your bud. Since weed shares many of the same terpenes as citrus fruits, the added taste and smell may enhance your experience while rehydrating the marijuana.

What you’ll need:

  • Dry cannabis
  • Resealable jar
  • Orange or lemon
  • Sharp knife or peeler
First, assemble what you’ll need to rehydrate your weed. Photo by: Gina Coleman/Weedmaps

Image lightbox

Instructions:

Step 1: Place dry cannabis in a resealable jar

Place dry cannabis in a resealable jar. Photo by: Gina Coleman/Weedmaps

Image lightbox

Step 2: Carefully peel the outer skin of a citrus fruit

Carefully peel the outer skin of a citrus fruit. Photo by: Gina Coleman/Weedmaps

Image lightbox

Step 3: Put a piece of peel in with the cannabis

Put a piece of peel in with the cannabis. Photo by: Gina Coleman/Weedmaps

Image lightbox

Step 4: “Burp” jar once or twice over the next day

“Burp” jar once or twice over the next day. Photo by: Gina Coleman/Weedmaps

Image lightbox

Step 5: Enjoy rehydrated weed within 24 hours

Enjoy rehydrated weed within 24 hours. Photo by: Gina Coleman/Weedmaps

Image lightbox

Bottom line

Moisture is essential for experiencing the best cannabis flavor and aroma, and rehydrating weed can be achieved with a few DIY solutions from ingredients in your kitchen.

Don’t over hydrate your weed

Rehydrating your weed isn’t labor-intensive, but it is something of a delicate dance. The goal of rehydrating is to get your bud back to the state of balance of moisture content that comes from a well-executed drying and curing process. As you rehydrate your weed, check on it rigorously to make sure you aren’t infusing it with too much moisture and risking mold growth.

How to rehydrate weed Copy article link to clipboard. Link copied to clipboard. Contents How to store weed Why would you want to rehydrate weed? How to rehydrate weed

Flavoring Weed with Extracts

Have you ever wanted to know the best and fastest way on how to flavor marijuana or have you seen guys struggle to learn the easy methods on how to add flavor to weed? If so, then you are in the right place. In this 3-minute read article, I will share with you the simplest way of flavoring weed with extracts.

As you may beware, flavoring weed makes it smell nice whether it is when it is still growing, harvesting, or when you are storing it. During these different periods, you will need to employ different strategies of flavoring marijuana.

Let’s discuss some of the things you can do to flavor your weed before you harvest, when harvesting, and after harvesting your weed.

Flavoring Weed Before Harvesting

Flavoring marijuana starts way long before you harvest your marijuana. If you want the marijuana strain you’ve planted to have a flavor you prefer, then you need to start preparations a few days before you embark on harvesting your weed.

According to expert marijuana growers, preparations start 3-5 days before harvesting time. During this time, you need to stop watering your marijuana plants. Stopping will enable the plant from usurping extra mineral salts and other nutrients from the soil. Besides, in those days, the soil will have lost water thus remaining dry.

Although you should stop watering your crops approximately 5 days before you start harvesting, you need to exercise caution. It is important not to stop watering the plants many days before you start harvesting, lest, your marijuana crops will wither fast, dry up, and finally die.

In the event that your marijuana crops start to wither fast or show any sign of wilting before the harvest day, you can add a little water to the crops. If you decide to do so, make sure you sprinkle the water evenly to hit each plant.

When harvest day finally comes, mix extracts from your preferred food-grade or 15 milliliters of mild solution to approximately 20 liters of clean water. The amount of liters of clean water depends on the expected harvest. You can increase the number of liters of water if the harvest is huge.

Now that you have a flavored mixture, slowly and gently water your crops. You should be careful not to waste the solution to surface runoff.

Allow the crops to consume the solution for a few hours (roughly, 3-5), before you start to cut your weed.

PS. By now, your weed has a lot of water. First, they have consumed the water from the soil for several weeks. Second, you have just watered them with a flavored solution a few hours before you started to cut them. Because of this, the weed is now moist. That is why you need to spread the crops properly to avoid dampness. Make sure there is enough airflow among the crops to minimize mold formation. If possible, keep the crops as separated as possible.

How To Add Flavor To Weed During Harvest

Sometimes, things may not go as planned. You may want to flavor your weed before harvesting but something happens and you are unable to do what you planned. All is not lost. You can still add flavor to your weed.

In this second step of flavoring weed with extracts, you will still use the same method you applied in step one. By now, you have just cut your fresh weed from the greenhouse or from wherever you planted them. You can still add flavor to the crops.

Unlike the first step that required you to water the crops with a mixture of 20 liters of water and your chosen flavor, you now need a little amount of the solution. You need to put the solution in a glass.

After filling a glass with a flavored solution, now it is time to cut a leaf of weed and dip it inside the mixture. You don’t have to wait until the leaves are dry. A fresh leave, full of life is ideal for dipping inside the mixture contained in a glass. Why dip a freshly-cut weed leaf into a flavored solution?

When the weed leaf is still alive, it has a high chance of drawing water from the glass up to the stalk and other parts of the weed.

PS. You need to give the leaves time to settle inside the water for about seven days. In these seven days, the leaves will have drained all the solution from the glass. You can then remove the leaves from the solution, chop them to your preferred size, then dry the harvest as you usually do.

How To Flavor Weed After Harvesting

The question of how to flavor marijuana at a time the leaves and the stalks seem to be withering and drying up, seems to be a hard one for many people. Nonetheless, there is nothing impossible about flavoring weed even when it seems that it is too late.

Even when the flowers are weak and jarred, you can still add flavor to this important crop. The first step towards adding flavor to weed at this time is to add essential items into the jar.

You need to find essential oil or any other extract that you prefer. Then, you will need to soak cotton balls inside the extract. The next thing would be to ensure you attach the cotton ball to the lid of the jar. Make sure the cotton ball does not fold anywhere. Rather, it has to hang from the lid facing down.

When you hang the cotton balls, make sure they do not stretch to touch weed buds. The other thing you need to watch for is to check whether there is excess moisture inside the jar because excessive moisture causes mold, which will result in the weed rotting.

You can also minimize the chances of your weed from rotting by adding several dried items into the jar. Some of the dried items you can add to your jar include flower petals, apple slices, and citrus peels. Alternatively, you can add to your marijuana spices such as cloves, cinnamon, and rosemary. If you do this, your weed will flavor your weed.

Final Thoughts

You don’t have to take weed in a traditional way. More than any other time in history, you can add flavor to your weed whether it is before you harvest, during or even after you have harvested your marijuana. Therefore, it is no longer how to flavor marijuana or how to flavor weed but when do you want to flavor your weed.

Buy our flavoured BLUEBERRY 420 strain now

Don’t forget to leave a comment below

Looking for ways to flavor your weed with extracts? Find out everything you need to know in our guide about flavoring weed with extracts! ]]>