Gigantic Marijuana Plants
- Escrito por : Ciara
- 2 Comentarios
Cannabis crops are some of the most versatile crops on the planet, capable of adapting to almost any growers needs thanks to the amazing variation in how long some strains take to grow versus others. You can find spectacular autoflowering strains that are ready to cut in just about two months of cultivation, and then you can also find seasonal strains that need certain photoperiods (periods of light and darkness) to grow and flower. Today we’re going to talk about some tips and tricks to grow gigantic marijuana plants; to do this they’ll need a longer growth period and a whole lot of care, but you’ll be rewarded with the biggest specimens that you have ever seen.
Many growers have already seen astonishing images in which American growers are standing beside incredible 4 or 5 meter tall marijuana trees with an enormously dense branch structure that end up looking like big green balls. This phenomenon is quite typical in Humboldt’s seed catalogue and other American seed banks, as well as professional growers books and of course thousands of images and videos online.
Choose a good strain
Choosing a strain with a decent growth level is essential because your plants entire structure will depend on this specific characteristic. Sativa strains tend to have a much larger growth as well as a larger distance between nodes and a thinner, taller structure. Indicas, however, grow into more manageable plants with shorter distances between nodes, more branches and a stronger central stem.
Indica and sativa hybrids obviously have characteristics from both genotypes, although depending on the strains used to create the hybrid and the percentage of indica vs sativa, they’re more likely to have certain characteristics. Generally, the biggest specimens will have a sativa percentage of over 60%; if the plant is indica-dominant then the specimens will be more compact but with a larger branch structure.
Make sure they get a good growth period
Growth timing is definitely a key element when trying to grow large plants due to the fact that once your plants move on to the flowering stage, they tend to get a lot bigger. This means that the bigger your plant grows during its growth stage, then the more they will develop during the flowering stage.
For outdoor crops, growers have to depend on the seasons and the climate for their plants to switch periods, whereas indoors the grower decides when to change the light period, allowing him or her to choose how big their plants should grow. This means that indoor growers can play around with the number of plants and the timing of their crops; with a shorter growth period you can have more plants. This is how SoG systems were born; cuttings don’t need a growth phase and seeds only need two growth weeks.
There are also growers that like to fill their crop area with just one plant, giving it an enormous growth period as well as a large flowerpot; this makes for plants that would leave outdoor growers astonished. Some seed banks keep mother plants for over 10 years, so we know that you can give your plants all the growth time you want and rest assured that they won’t die (if you take care of them properly).
So, now that you know that you can grow plants indoors for as long as you want, and that outdoors marijuana plants grow a larger branch structure, the question is: What would happen if you let your plants have a long growth period and then took them outside to flower?
When you grow your plants indoors and then take them outdoors they go from getting 18h of light a day to getting a lot less, so they immediately begin flowering. If it’s still growth season your plants will begin budding but then they’ll revegetate, losing potency in the process which is something you want to avoid, especially with a crop like this that takes a lot more work.
However, if you take your plant outdoors to flower when the sun begins to set earlier, your plants will begin flowering normally and should be ready around the same time they would be ready if you had planted them outside from the beginning. The obvious difference is that these plants will be much larger and have a much higher yield; by using this method you can get plants that are over 4m tall.
Increase the number of branches through pruning
If you use the previous method it’s not hard to get gigantic plants, but large plants don’t necessarily have a lot of branches. If you’re looking to increase the number of branches on your plants then you’ll need to consider pruning them.
It’s actually quite common for indoor growers to prune their plants every now and then when they’re employing a long growth period. If done properly without stressing your plants too much, then your plants should grow various new branches per pruning. All you’ll need to do is use a revitalizer on your plants to reduce stress and a couple of weeks after pruning more branches will have grown. If you’re thinking of using a growth period of a few months then you’ll have enough time to repeat this process a good few times. Once they begin flowering the amount of branches will obviously be higher, making your plants incredibly leafy and bushy.
Stake or string your plants to increase strength
Staking plants is essential if you want them to develop correctly and constantly, so you’ll need to start doing it during their first few days. You’ll need to start by staking the trunk and then wiring the branches that grow, which will give a higher yield thanks to being held up.
When your plants have reached the production levels that we were talking about before, the stakes or string you’re using might not be strong enough to put up with the weight of the branches and buds; one of the most recommended systems is by using metal meshes. By doing this you can hold up each branch individually and with less stress on the mesh due to the fact that the weight of the plant will be evenly distributed. It’s also pretty easy to set up, all you have to do is extend the mesh over your plant, placing each branch in a hole making sure that light can still access all of them.
So, now you know that if you want to get monstrously huge plants you have to consider the strain, give them a much longer growth period, prune selectively, and make sure that it can deal with the weight of all of those amazing buds. If you follow all of these tips you’re guaranteed to produce enough per crop to keep you going in between seasons. We recommend using organic fertilizers to increase flavor and cannabinoid levels in your plants, so that way your gigantic marijuana plants will have an extremely high production rate as well as powerful and flavorful buds.
Learn how to grow gigantic marijuana plants, you'll get an enormous yield without using any chemical fertilizers that could alter the final product.
What is the Optimum Final Height for Cannabis Plants?
Is there an Optimal Final Height for the plant?
Most everything I read says to continue the Vegetative Stage until the plant is about 1/2 its desired height, then flip to Flowering Stage, because plants about double in height on average.
Assuming you are keeping the canopy as flat as possible. Should you try for as tall as your tent/light will allow without burn? Or is there an optimal height found to give best yield/quality? Does the plant waste energy moving the nutrients up a taller plant?
I see amazing pictures of bountiful plants that appear to be under 36″, with lots of fat dense colas.
When it comes to training cannabis plants indoors, in the best-case scenario, you want your plants to be big enough to support as much bud as your grow light can produce. There’s no point in having a whole bunch of bud sites located below where light can reach because buds that don’t get any light tend not to fatten up. So, when growing indoors the optimal length of buds is heavily dependent on your grow light.
Optimal Plant Height Depends on Your Grow Light. Bigger Lights Can Support Bigger Plants and Longer Buds!
If you examine the structure of an indoor cannabis plant at harvest, you’ll often see that there are long fat “colas” at the top, and underneath there are smaller buds. The further down you get on the plant, the smaller the buds are. After a certain point, the buds are so small that they don’t really add any significant weight.
Big buds form on top, but as you get further from the light, the buds get smaller until there are almost none. If these plants had been allowed to get any taller (with everything else the same), they likely wouldn’t have produced much more bud than they did here. Any extra time spent in the vegetative stage likely would have been a waste of time.
This was the longest solid cola I’ve gotten from a 250W HPS grow light; it was about 12″ long. Below that point, the plant still made buds, but they were individual buds as opposed to a long cola. The final height of a plant should generally be about twice the height of your longest main cola. That tends to be the “sweet spot” for a lot of strains.
If nothing else were changed, the yields would not be that different whether the plant is 2 feet tall or 4 feet tall under a 250W HPS, because the light doesn’t go down that far into the plant. However, a bigger grow light could have supported a taller plant.
A too-tall plant isn’t a big deal if it fits in your grow space, but the extra lower growth that doesn’t produce bud is essentially a waste of electricity, time and money, since you potentially could have shaved weeks off your vegetative stage without sacrificing yields!
Under a 600W HPS, I haven’t ever seen a main cola that’s much longer than 2 feet even if light is getting down almost to the floor. So, I’m not sure how much benefit you would get by switching to 12/12 after the plant is 2 feet tall. These plants were switched at around 20″ tall under a 600W.
You can support even taller plants and longer colas under bigger grow lights!
Examples with Common Grow Lights
Although it’s true you want to flip to the flowering stage when your plant is about half the final desired height (since it will about double in size after the flip to the flowering stage), here are some general guidelines that have worked well for me:
Note: Always try to do an “autopsy” after you grow and take a hard look at your pictures to see if there’s anything you could have done to get even better results! I learn something new every grow!
- CFLs, T5s and Other Fluorescents – Switch when plant is 6-12″ tall (unless you also have light from the sides, then it can be a bit taller as long as all the bud sites are getting light)
- 250W HPS– Switch when plant is
400W HPS– Switch when plant is
600W HPS– Switch when plant is
LEC or CMH Grow Lights– Follow general guidelines for HPS lights based on your wattage (a 315W is good for
15″ tall, and a 630W is good for
Note: Defoliation (removing leaves to expose bud sites) lets you produce bigger buds further down into the plant! That means your light could potentially support slightly taller plants with longer buds if you use defoliation. This is why it’s important to always test your plants with your light and your setup, as everyone’s results will be a little different based on their strain, environment and personal growing techniques.
“Tall” vs “Short” Strains
Although plants typically double in height after the switch, some particularly tall and short strains can stretch more or less than average! Always pay attention to what the breeder tells you about your strain and plan accordingly!
- If you have a “tall” strain, switch to the flowering stage earlier than recommended (1/3 the final desired height)
- With a “short” strain you should wait until the plant is taller before the switch (3/4 the final desired height), to ensure the plant is tall enough after it’s done stretching.
In the picture below, the grower could probably have switched to 12/12 earlier without hurting yields because the buds at the bottom are not adding much weight. Sativa plants like this can triple in height after the switch to the flowering stage, so it’s common to end up with a Sativa plant that’s far taller than expected!
Optimum Cannabis Height Outdoors?
Height restrictions are much different for outdoor plants that mature under the powerful light of the sun. Outdoors, plants can keep getting taller and taller as long as they get enough direct sunlight a day and have enough root space.
Root space is more critical outside and with soil than indoors or with coco or hydro. Root space for outdoor plants is usually provided with big fabric pots (600+ gallon containers in some cases!) or with raised beds full of good soil.
This plant got 12 feet tall in just one summer, with a 3+ foot cola at the top! It received 9+ hours of direct sunlight a day. Unlike an indoor grow light, the size of outdoor plants is limited by the root space and the number of hours of direct sunlight a day!
So What’s the Best Plant Height?
Ultimately, there is no “right” or “best” height for a cannabis plant, and like most things when it comes to growing, it depends a lot on your setup. I’ve given you some general ideas of what to aim for and what to expect, but it’s also very simplified. Unfortunately, there’s no single formula that fits every growers setup. But the following pictures will hopefully help give you some ideas!
Check Out Examples of Cannabis Plants That Are Too Tall, Too Short, or Just Right!
This marijuana plant got excellent yields for its size under a 600W grow light, but notice how the buds are thick all the way down. This is a clue that this plant likely would have produced more if it’d been allowed to get a little bigger before switching to the flowering stage – you can see the buds “want” to go down further than the bottom of the plant. Additionally, there is empty space behind and to the left side of the plant. If the plant had been trained to grow wider in the vegetative stage, those empty spots would be full of colas, too!
In this example, the plant was “lollipopped” (the lower part of the plant was stripped of leaves and bud sites before being switched to the flowering stage). However, on the parts of the plant that weren’t stripped, you can see significant buds going a lot further down. This plant likely would have yielded even more if it’d been allowed to keep more bud sites. The grower could have still stripped all the leaves, but they may have gotten better results if they’d left bud sites for at least a few more inches if not all the way to the bottom.
Notice how small the buds are at the bottom of this next plant. If it had been allowed to get much taller it likely wouldn’t have produced significantly more yields, but it would have taken extra time in the vegetative stage. This is an example of what the plant should generally look at harvest like if it’s the proper height – about twice the height of the big buds on top, with significant but small buds at the bottom! It could have been a little shorter and probably not lost any yield, but definitely an example of a good final height!
Here’s another example of a plant that was a good height at the end. You can see there isn’t a whole lot of extra growth at the bottom with small buds. However, you can see the buds end where the thick layer of leaves begins. This grower could have used some light defoliation to expose more bud sites lower down, and produced buds further down into the plant. In that case, their grow light could possibly have supported a plant that was even taller!
Another example of plants that were a great height at harvest!
This plant was under a 1000W light and has huge, thick, arm-sized buds that go basically to the bottom of the plant. These buds are so thick at the bottom where they end that it’s good evidence this plant would have produced quite a bit more bud if it had been allowed to get taller in the vegetative stage. Those colas would have been longer, and there would have been many chunky buds underneath. This plant should probably have been about twice the height (twice the size of the longest cola) to have really produced what it was capable of under this grow light. But the grower still had a whole lot of bud to console himself with 🙂
What to Remember About Plant Height
- The optimal plant height before flowering is about the length of your “main” (solid) colas. For your first couple of grows, you’ll have to guess (and I gave some guidelines above to help get you started), but after some experience with your setup you’ll be able to dial it in perfectly every time as long as you do strain research first.
- Increasing overall plant size and number of bud sites in the vegetative stage (while staying the proper height) will increase number of colas and ultimately yields.
- Training the canopy to be flat, yet wide enough to fill the entire space under the light ensures all cola are a good distance to the grow light in the flowering stage.
- Letting plants get taller than your light can support will result in wasted time in the vegetative stage!
- Defoliation lets you produce bigger buds further down into the plant by exposing more bud sites to light!
- Again, always try to do an “autopsy” after you grow and take a hard look at your pictures to see if there’s anything you could have done to get even better results! I learn something new every grow!
Now that you have a better idea of the proper plant size and its relation to your grow light (and how to diagnose after the fact whether you should have let the plant get taller or shorter), I’m hoping that some of you will be able to either increase your yields by letting your plants get to the right size, or save time in the vegetative stage by switching to flowering before your plants get bigger than necessary! 🙂
P.S. One Last Thing About Plant Size…
In addition to the height, the overall size/mass of the plant has a big effect on final yields. A bigger plant can simply support more and bigger colas. Because of that, it’s good to build up overall plant size as opposed to just height to maximize yields. You want plants that are wide and flat like a table, not tall and skinny!
Many indoor growers let their plants get bigger horizontally while restricting the plants’ ability to grow taller than the grow light can support. This lets you keep adding more and more bud sites without letting the plants get too tall.
In addition to making sure your plants are the proper height, you also want to train your plant canopy to be flat and wide before switching to the flowering stage. The best yields are achieved by filling the entire grow space front-to-back and left-to-right with a flat canopy because it lets all the buds be close to the grow light.
Maximize your yields by filling your grow space with colas!
Too-tall cannabis plants waste time and electricity, but too-short plants end up hurting yields! Learn how to find that perfect sweet spot for plant height!